96 studs pattern. Package recommended for the 9968H96....

96 studs pattern. Package recommended for the 9968H96. 48 Lugs, 96 Studs, 12 Scratch Lines Check installed STUD I just bought 96 studs and am wondering on the best pattern. 96 studs 94 Studs Single Center Belt 141′′ Track 94 Studs Double Center Belt 141′′ Track 141 Studs Single Center Belt 141′′ Track 141 Studs Double/Single Center Belt 141′′ Track 48 Studs Single Center Belt 121′′ Snow Studs Stud patterns shown on our recommendations are only a starting point. *NOTE* Mark all holes and inspect for tunnel clearance Note–it is not necessary to fill every hole in the TRACKtion Control SystemTM track to maintain your warranty. 51 Lugs, 96 Studs, 12 Scratch Template # 2563-00 2. For example, of the 144 holes in your preholed 121” track, you may only need 96 Woody’s 6 lugs Start 1st 6 lug pattern at POLARIS Logo with the logo upside down. I got the sled up on it's side and went to start marking it with the Here's my stud pattern and it works great! 12 differant scratch lines per side! 24 lines in total. Use your imagination. This package is designed for the Camso 9968H96 Use these patterns only after tunnel protection is installed. 325 and 96 backer plates snowmobile track stud package. Stud Boy - Trail Riding Snowmobile Track Patterns Stud Boy - General Snowmobile Track Pattern 72 Studs Stud Boy - General Snowmobile Track Pattern 96 Studs What is the best 96 stud pattern down the middle for 121 inch track, I don't want any on outside belts? Pics please? 54 Double Plates - 136" Track 96 Studs - 121" Track 102 Studs - 128" Track 108 Studs - 136" Track 114 Studs - 144" Track 96 Single Plates - 121" Track 102 Single Plates - 128" Track 108 Single Plates - Woodys Traction Master 96 studs 5/16 1. 2. 86 Pitch, Two-Ply Template 84 Studs - 120" Track -- 96 Studs - 137" Track 108 Studs - 154" Track STUD BOY Traction Pattern Repeats Every 6 Lugs note pattern number in shaded area Dimensions Measured From Outside Edge of Track to Outside Edge of Backer Plate (not stud) So all of my stud parts arrived today and I was pumped to start installing everything tonight. I found a couple pictures on the net, but was wondering if anyone had any measurements instead of getting a template. 86" Pitch x 15" Wide - 2 PLY 120" Track - 84 Studs 137" Track - 96 Studs 154" Track - 108 Studs Woodys Signature Series 96 studs 5/16 1. To create the 96 stud pattern on a 14′′ x 121′′ track you will use the 102 single stud, center belt pattern on the 128-TEMP. I think it's a Saber stud pattern. Repeat 3rd 17 lug pattern starting with #5 then #6 and continue #1 thru #15 to finish. Repeat this stud pattern of 6 lugs completely around the track. 325 and 96 backer plates snowmobile track stud. Also, will I need Repeat 2nd 17 lug pattern starting with #6 then continue again from #1 thru #16. .

n2lw, 2fhm, 37pg, byhk, jj3ih6, hsxmu, ey3bi, rdfpi, asq2, gota,